D01 ENGINE NOT RUNNING SMOOTHLY / (HESISTANT) - Lancia - Ypsilon - eLearn

2427475 - D01 ENGINE NOT RUNNING SMOOTHLY / (HESISTANT)

During acceleration, there are decreases in performance, even prolonged

0	PRELIMINARY CHECKS	All OK	Problems met	Operation
		Results of the tests
	Preliminarily check: the state of the spark plugs and leads; the condition of the air intake circuit	Continue to Step 1	Spark plugs dirty or damaged	Replace the spark plugs Op. 5510D10
			Spark plug leads damaged	Replace the spark plug leads Op. 5510D14
			Air intake circuit fault	Restore the correct operation of the intake circuit
1	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socket. Check: that there are no faults in the engine management control unit; parameter plausibiilty	Continue to Step 2	'Supply system' error detected	See table Z50
			Another error dectected in the control unit	Continue following the instructions for the diagnostic equipment.
			Inconsistent parameter	Continue following the instructions for the diagnostic equipment.
2	ROAD TEST WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Road test the vehicle, reproducing the conditions in which the fault arises, keeping the diagnostic equipment connected. Check: that there are no faults in the engine management control unit; parameter plausibiilty	Continue to Step 3	Error arises suddenly in the control unit	Continue following the instructions for the diagnostic equipment.
		Continue to Step 3	Inconsistent parameter	Continue following the instructions for the diagnostic equipment.
3	CHECK ON FUEL PRESSURE	All OK	Problems met	Operation
	Carry out a road test, reproducing the conditions in which the fault arises.Check the fuel supply pressure Op. 0510C10	Continue to Step 4	Incorrect pressure: obstructions in the fuel delivery pipe	Remove the obstructions in the fuel pipe; if necessary replace it
			Pressure not correct: tank insufficiently ventilated	Restsore the tank ventilation
			Pressure not correct: fuel pump electrical circuit broken	Repair fuel pump electrical circuit
			Pressure incorrect: fuel pump damaged	Replace fuel pump assembly
4	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists: control unit faulty	Replace control unit Op. 1056B82