2427632 - X12 ENGINE OIL LEAKS

A leak of engine oil can be seen with dripping and/or fouling of the engine
Results of the tests
0PRELIMINARY CHECKSAll OKProblems metOperation
Preliminarily carry out a visual inspect to locate the component or area which is leaking.If the visual inspection is not sufficient, wash the engine, dry it and cover the parts involved in talc: road test the vehicle to identify the leakNo leak located:Continue to Step 1Leak from the drain plugContinue to Step 1
Leak from the sumpContinue to Step 2
Leak from the oil filterContinue to Step 3
Leak from the exhaust valveContinue to Step 4
Leak from the engine gasketsContinue to Step 5
Oil in the cooling circuitContinue to Step 5
1DRAIN PLUG CHECKAll OKProblems metOperation
Check the condition and the seal of the oil drain plugContinue to Step 2Tightening of drain plug not correctRestore the correct tightening
2OIL SUMP CHECKAll OKProblems metOperation
1.2 8v 1.2 16v Heater

check

  • the condition of the oil sump;
  • the seal of the sealant between the sump and the crankcase
  • that the bolts fixing the sump are correctly tightened
Continue to Step 3Oil sump damaged or distortedReplace the oil sump ( Op.   1020A20  )
Lack of sealant or tightening not correctRestore the correct tightening
1.2 8v 1.2 16v Air Conditioner

check

  • the condition of the oil sump;
  • the seal of the sealant between the sump and the crankcase
  • that the bolts fixing the sump are correctly tightened
Continue to Step 3Oil sump damaged or distortedReplace the oil sump ( Op. 1020A26)
Lack of sealant or tightening not correctRestore the correct tightening
3OIL FILTER CHECKAll OKProblems metOperation

check

  • the condition of the oil filter;
  • the seal and condition of the gasket
Continue to Step 4Oil filter damaged or distortedReplace the oil filter and the gasket ( Op.   1084B30  )
4OIL PRESSURE RELIEF VALVE CHECKAll OKProblems metOperation
1.2 8v 1.2 16v HeaterCheck the condition of the oil pump pressure relief valveContinue to Step 5Valve stuck in closed positionReplace the oil pump ( Op.   1020D14  )
1.2 8v 1.2 16v Air ConditionerCheck the condition of the oil pump pressure relief valveContinue to Step 5Valve stuck in closed positionReplace the oil pump ( Op. 1020D16)
5ENGINE GASKETS CHECKAll OKProblems metOperation
Gain access to the crankshaft and camshaft oil sealsCheck the seal of these gasketsContinue to Step 6Crankshaft gaskets damagedReplace the gaskets involved ( Op.   1024A10  )
Camshaft gaskets damagedReplace the gaskets involved ( Op.   1036B10  )
6CHECK ON CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosisFault persistsSearch for the fault starting from another symptom'
A leak of engine oil can be seen with dripping and/or fouling of the engine
Results of the tests
0PRELIMINARY CHECKSAll OKProblems metOperation
Preliminarily carry out a visual inspect to locate the component or area which is leaking.Check that there is no engine oil in the coolant.If the visual inspection is not sufficient, wash the engine, dry it and cover the parts involved in talc: road test the vehicle to identify the leakContinue to Step 1Leak from the drain plugContinue to Step 1
Leak from the sumpContinue to Step 2
Leak from the oil filterContinue to Step 3
Leak from the exhaust valveContinue to Step 4
Leak from the engine gasketsContinue to Step 5
Oil in the cooling circuitContinue to Step 5
1DRAIN PLUG CHECKAll OKProblems metOperation
Check the condition and the seal of the oil drain plugContinue to Step 2Tightening of drain plug not correctRestore the correct tightening
2OIL SUMP CHECKAll OKProblems metOperation

check

  • The condition of the oil sump;
  • The seal of the sealant between the sump and the crankcase;
  • That the bolts fixing the sump are correctly tightened
Continue to Step 3Oil sump damaged or distortedReplace the oil sump Op. 1020A26
Lack of sealant or tightening not correctRestore the correct tightening
3OIL FILTER CHECKAll OKProblems metOperation

check

  • The condition of the oil filter;
  • The seal and condition of the gasket
Continue to Step 4Oil filter damaged or distortedReplace the oil filter and gasket Op.   1084B30 
4OIL PRESSURE RELIEF VALVE CHECKAll OKProblems metOperation
Check the condition of the oil pump pressure relief valveContinue to Step 5Valve stuck in closed positionReplace the oil pump Op. 1020D16
5ENGINE GASKETS CHECKAll OKProblems metOperation
Gain access to the crankshaft and camshaft oil sealsCheck the seal of these gasketsContinue to Step 6Crankshaft gaskets damagedReplace the gaskets involved Op.   1024A10 
Camshaft gaskets damagedReplace the gaskets involved Op.   1036B10 
6CHECK ON CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosis.