2428858 - 1008C30 power unit lower reaction link r r
Removing
(
Refitting
)
Position the vehicle on the ramp.Position a hydraulic jack under the gearbox.1. Undo the bolt fixing the power unit lower reaction rod to the
front suspension crossmember.2. Undo the bolt (2a) and remove the lower power unit reaction rod
(2b).
Refitting
(
Removing
)
1. Place the power unit reaction rod (1a) back in its housing, then
fasten by tightening bolts (1b) and (1c) to the recommended torque.  | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1b | Bolt | LOWER ROD ON ENGINE | M12 | (Gearbox side) 7.2 ÷ 8.8 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1c | Bolt | LOWER ROD ON ENGINE | M12 | (Front suspension crossmember side) 11.4 ÷ 12.6 |
