1056B50 COOLANT TEMPERATURE SENSOR - R + R - Lancia - Ypsilon - eLearn

2428921 - 1056B50 coolant temperature sensor - r + r

) Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal - 1048A32 sleeve from air cleaner to intake manifold - r + r . 1. Disconnect the electrical connection from the engine coolant temperature sensor.

	Name	Connector
1	Engine temperature sender unit	K36

2. Undo and remove the engine coolant temperature sensor.

Refitting ( Removing

) Place the engine coolant temperature sensor back in its housing and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	COOLANT TEMP SENSOR	M16	3.4

Connect the electrical connection to the engine coolant temperature sensor. Proceed with refitting - 1048A32 sleeve from air cleaner to intake manifold - r + r . Connect the negative (-) battery terminal.