2429642 - 7050A10 rear seat - r+r

Removing ( Refitting )  - 7050A20  one-piece rear seat cushion - r r1. Release the retaining buttons.

	Name	Country
1	Scraper blade	1.878.077.000

2. Remove the mat under the cushion. 1. Unscrew bolts (1a). If necessary, move the seat structure (1b) using the lever (1c) in order to reach some of the bolts. 2. Undo the pins.3. Lower the backres (3b) using the lever (3a) and remove the seat assembly. 1. If necessary, undo the bolts (1a) and remove the seat sliding brackets (1b). Refitting ( Removing ) Check that the seat and the mountings are not damaged.Position the sliding brackets and secure them using the bolts.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR SEAT CUSHION BRACKET	M8	4.0

Position the seat and tighten the pins.Tighten the bolts and position the mat.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR SEAT ASSEMBLY	M8	2.5

Engage the retaining buttons. - 7050A20  one-piece rear seat cushion - r rCheck that the seat slides and folds over correctly.