2429102 - 1820B30 OPERATING CYLINDER/CLUTCH HYDRAULIC ACTUATOR - R.R.
Removing
(
Refitting
)
Proceed with removal
- 5530B10 battery - r+r
.
Proceed with removal
- 5530B52 Battery DRIP TRAY/SUPPORT
- R.R.
.
Remove the cap on the bleed valve.Connect the collection system (pipe and
reservoir) to the bleed valve on the clutch operating cylinder.Lift the retaining clip until the first
click is heard and remove the pipe sufficiently to uncover the
bleed hole.Let the hydraulic clutch system drain completely.1. Completely lift the retaining clip (1a) and disconnect the pipe
between the master cylinder and the clutch operating cylinder (1b)
operating cylinder side.2. Undo the bolts (2a) and remove the clutch operating cylinder
(2b).
Refitting
(
Removing
)
Replace the clutch operating cylinder,
then fix it tightening the bolts to the recommended torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | CLUTCH SLAVE CYLINDER | M8 | (Gearbox side) 1.6 ÷ 2.4 |