2429127 - 2125C22 gear lever and mount - r r
Removing
(
Refitting
)
Proceed with removal
- 7040L28 tunnel switch panel -
r r
.
Proceed with removal
- 7040L22 REAR TRIM on TUNNEL
-R.R.
.
Proceed with removal
- 7040L20 tunnel trim - r r
.
Proceed with removal
- 7040A18 glove compartment on
facia - arrange
.
Proceed with removal
- 7040A30 Left instrument panel
lower TRIM - R.R.
.
Proceed with removal
- 2125A30 lever/knob cover - r +
r
.
Proceed with removal
- 7040A28 TRIM on gearbox control
panel - R.R.
.
1. Disconnect the gear selector and engagement cables for the manual
gearbox.2. Separate the gear selector and engagement cables (2a) from the
support releasing the clips (2b).3. Undo the nuts (3a) and the bolt (3b) and remove the manual gear
control lever and support (3c).
Refitting
(
Removing
)
Place the manual gear control lever and
support in its housing and secure it using the nuts and the bolt.Fasten the gear selector and engagement
cables to the mounting using the clips.
Connect the gear selector and engagement
cables to the manual gearbox control lever. | Adjust the gear selector cable (OP2125C30). |