2428855 - 1008B10 power unit front mount (timing side) flexible block - replace

Removing ( Refitting ) 1. Fit a bracket and fasten at the point shown in the figure. Secure with a bolt.2. Fit the tool (2a), complete with support mountings (2b).

	Name	Country
2a	Crossmember	1.870.595.000

	Name	Country
2b	Support mountings	1.870.650.000

3. Connect the link to the bracket fitted previously. 1. Undo the nuts (1a) and (1b), then remove the timing side power unit support flexible mounting (1c). Refitting ( Removing ) 1. Place the timing side power unit support flexible mounting (1a) in position and secure it tightening the nuts (1b) and (1c) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Nut	FRONT RUBBER MOUNTS	M10	(Rigid support side) 4.5 ÷ 5.5

	Fastening	Component	Ø	Value(daNm)
1c	Nut	FRONT RUBBER MOUNTS	M10	(Bodyshell side) 4.1 ÷ 5.0

Remove the tools and the safety bracket used for supporting the power unit from the cylinder block/crankcase.

	Name	Country
-	Crossmember	1.870.595.000

	Name	Country
-	Support mountings	1.870.650.000