2428931 - 1068A10 accelerator pedal control - check, adjust if necessary and lubricate

Proceed with removal  Refer to op.. 1048A10  air cleaner filtering element - replace . With the pedal at rest, pull the accelerator cable through a travel of 3-6 mm and ensure the throttle valve does not open.If it does, adjust the accelerator pedal as described below.Ensure the accelerator pedal is in rest position.1. Remove the accelerator control cable clip.2. Adjust the sleeve of cable (2a) by moving it forward or backward and then lock with clip (2b). Adjust cable (1c), checking that when the pedal is fully released (at rest) the throttle valve is closed (cable not under tension) and when the pedal is fully depressed (at the end of its travel) the throttle valve is fully open (cable under tension). After adjustment, with the pedal at rest, pull the accelerator cable through a travel of 3-6 mm, ensuring that the throttle valve does not open. Proceed with refitting  Refer to op.. 1048A10  air cleaner filtering element - replace .