1080E28 ENABLEMENT SOLENOID FOR FLOW OF FUEL VAPOUR TO INLET - R+R - Lancia - Ypsilon - eLearn

2428956 - 1080E28 enablement solenoid for flow of fuel vapour to inlet - r+r

) Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal - 1048A10 air cleaner filtering element - replace . 1. Disconnect the electrical connection from the inlet fuel vapour enabling solenoid valve.

	Name	Connector
1	Fuel vapour recovery solenoid	L10

2. Disconnect the rapid attachment coupling for the fuel vapour recover pipe, solenoid side.3. Open the retaining spring (3a) and remove the solenoid valve (3b) enabling the passage of fuel vapours to the intake.

Refitting ( Removing

) Refit in its seating the solenoid which enables the passage of fuel vapours to the intake and secure with the retaining clip.Connect the rapid attachment coupling for the fuel vapour recovery pipe, solenoid side.Connect the electrical connection to the inlet fuel vapour enabling solenoid valve. Proceed with refitting - 1048A10 air cleaner filtering element - replace . Connect the negative (-) battery terminal.