2429110 - 2110A60 manual gearbox/engine coupling bracket - r+r
Removing
(
Refitting
)
Position the vehicle on the ramp.1. Undo the bolts securing the bracket between the manual gearbox/engine,
crankcase side.2. Undo the bolt (2a) and the bolt (2b) and remove the manual gearbox/engine
bracket (2c).
Refitting
(
Removing
)
1. Place the manual gearbox/engine bracket (1a) back in its housing
and secure it to the gearbox tightening the bolt (1b) and the bolt
(1c) to the recommended torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1b | Bolt | GEARBOX/ENGINE COUPLING BRACKET | M12 | (Gearbox side) 5.0 ÷ 6.1 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1c | Bolt | GEARBOX/ENGINE COUPLING BRACKET | M12 | (Gearbox side) 5.0 ÷ 6.1 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 2 | Bolt | GEARBOX/ENGINE COUPLING BRACKET | M8 | (Engine crankcase side) 2.5 ÷ 3.1 |
