2429189 - 3340A28 right front wheel rpm sensor - r r

Removing ( Refitting ) Position the vehicle on the ramp.Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

NameConnector
-Battery  A1B 
Proceed with removal  - 4450B04  right front wheel r r . Proceed with removal  - 7055B66  Engine compartment DUST SHIELD protection in right front wheel arch - R.R. . Proceed with removal  - 7055B91  Right front WHEEL ARCH LINER - R.R. . 1. Disconnect the electrical connection for the right front wheel rpm sensor.

NameConnector
1Right. front wheel sensor for ABS  K71 
1. Undo the bolt (1a) and disconnect the right front wheel rpm sensor (1b) from the front pillar.2. Disengage the right front wheel rpm sensor electrical wiring from the attachments in the wheelarch.3. Remove the right front wheel rpm sensor after withdrawing the electrical wiring from the passage on the bulkhead.
Refitting ( Removing ) Refit the right front wheel rpm sensor by passing the electrical wiring through the passage on the bulkhead. Place the right front wheel rpm sensor back in its housing on the pillar and fix it tightening the bolt to the recommended torque.

FasteningComponentØValue(daNm)
-BoltABS SYSTEM FRONT WHEEL RPM SENSORM6(Stub axle side) 0.6 ÷ 0.8
Secure the right front wheel rpm sensor electrical wiring to the attachments in the wheelarch.Connect the electrical connection for the right front wheel rpm sensor. Proceed with refitting  - 7055B91  Right front WHEEL ARCH LINER - R.R. . Proceed with refitting  - 7055B66  Engine compartment DUST SHIELD protection in right front wheel arch - R.R. . Proceed with refitting  - 4450B04  right front wheel r r . Connect the negative (-) battery terminal.Remove the car from the ramps.