2429191 - 3340A34 rpm sensor (one) of one l/h or r/h rear wheel - r+r

Removing ( Refitting ) .
The following procedure describes removal/refitting of the left rear wheel rpm sensor; proceed as for the right rear wheel rpm sensor.
Position the vehicle on the ramp.Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

NameConnector
-Battery  A1B 
1. Undo the bolt (1a) and remove the rear wheel rpm sensor (1b).2. Release the rear wheel rpm sensor electrical wiring from the attachments on the rear suspension.
1. Disconnect the electrical connection for the rear wheel rpm sensor.

NameConnector
1Left rear wheel sensor for ABS.  K75 

NameConnector
1Right rear wheel sensor for ABS.  K76 
2. Remove the right front wheel rpm sensor after releasing the electrical wiring from the underbody fastenings.
Refitting ( Removing ) Connect the electrical connection for the rear wheel rpm sensor.Secure the rear wheel rpm sensor electrical wiring to the underbody fastenings.Place the rear wheel rpm sensor back in its housing and fix it tightening the bolt to the recommended torque.

FasteningComponentØValue(daNm)
-BoltABS REAR WHEEL RPM SENSORM60.6 ÷ 0.8
Secure the rear wheel rpm sensor electrical wiring to the rear suspension fastenings.Connect the negative (-) battery terminal.Remove the car from the ramps.