Removing
(
Refitting
)
1. Using a plastic blade, remove the badge (1a) unsticking the double
sided tape (1b) from the perimeter and releasing the centering pins
(1c).
Refitting
(
Removing
)
Check that the crest is undamaged.1. Clean the badge housing, removing the residual adhesive and degrease
with heptane.2. Remove the protective film (2a) for the double sided tape and
place the badge in position and apply pressure.
Removing
(
Refitting
)
1. Using a plastic blade, remove the badge (1a) unsticking the double
sided tape (1b) from the perimeter and releasing the centering pins
(1c).
