7210E56 R.R. TAILGATE - Lancia - Ypsilon - eLearn

2429741 - 7210E56 R.R. TAILGATE

) - 7015A04 tailgate interior panel - r+r - 5550D16 third stop light - r+r - 7015B10 single tailgate lock - r+r or repair with panel/protection removed1. Disconnect the electrical connections (1a, 1b, 1c, 1d, 1e).

	Name	Connector
1a	Left number plate light	F50

	Name	Connector
1b	Right number plate lgiht	F51

	Name	Connector
1c	Switch on boot outer handle	I33A

	Name	Connector
1d	Switch on boot outer handle	I33B

	Name	Connector
1e	Rear window wiper motor	N16

2. Undo rubber covers (2a) and disconnect the heated rear window electrical connections (2b).

	Name	Connector
2b	Heated rear windscreen	P55A

	Name	Connector
2b	Heated rear windscreen	P55B

3. Disconnect the wiring from the retainers.4. Connect a probe to one end (4a) of the wiring and a probe to end (4b) to help refit the wiring.5. Prise wiring channel (5a) out of the hole (5b) on the tailgate.6. Remove wiring (6a) from the tailgate through hole (5b).7. Support the tailgate and, using a screwdriver, prise off (without detaching) the upper lift device retaining clips.8. Undo the hinge bolts.9. Remove the tailgate.

Refitting ( Removing

) Check the tailgate is undamaged.Position the tailgate and screw in the hinge bolts without tightening.Attach the support devices and fit the springs.Refit the wiring inside the tailgate using the probes fitted previously.Fit the wiring channel and secure the wiring to the retainers.Connect all the electrical connections. - 7015B10 single tailgate lock - r+r or repair with panel/protection removed - 5550D16 third stop light - r+r - 7015A04 tailgate interior panel - r+r - 7015A14 tailgate - adjust centring and profile - includes hinge and compartment seal adaptation