2428839 - 0510A30 cam lift - check with cam cover(s) removed

Removing ( Refitting ) Proceed with the removal  - 1048A10  air cleaner filtering element - replace Proceed with the removal  - 4450B04  right front wheel r r Proceed with the removal  - 7055B66  Engine compartment DUST SHIELD protection in right front wheel arch - R.R. Proceed with the removal  - 7055B91  Right front WHEEL ARCH LINER - R.R. Proceed with the removal  - 1008B10  power unit front mount (timing side) flexible block - replace Proceed with the removal  - 1008A46  cam shaft left rigid mount - r r Proceed with the removal  - 1032D12  timing system protective cover(s) - r + r Proceed with the removal  - 1092B40  air conditioner compressor/alternator drive belt - r + r Proceed with the removal  - 1092A10  Crankshaft services PULLEY - R.R. Proceed with the removal  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement Proceed with the removal  - 1032B40  toothed-driven pulley (one) - r + r with timing belt removed Proceed with the removal  - 1016A20  single cam cover - r + r and replace gasket Proceed with the removal  - 1036B32  camshaft seal support with ignition coil r + r including seal replacement Proceed with the removal  - 1036B10  overhead camshaft - r r on vehicleCheck that the nominal lift of the cams on the valve shaft is within the recommended values.

	Measurement		Value
-	Camshaft cam height (mm)	Exhaust	8
Inlet	8

Refitting ( Removing ) Finish by refitting  - 1036B10  overhead camshaft - r r on vehicle Finish by refitting  - 1036B32  camshaft seal support with ignition coil r + r including seal replacement Finish by refitting  - 1016A20  single cam cover - r + r and replace gasket Finish by refitting  - 1032B40  toothed-driven pulley (one) - r + r with timing belt removed Finish by refitting  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement Finish by refitting  - 1092A10  Crankshaft services PULLEY - R.R. Finish by refitting  - 1092B40  air conditioner compressor/alternator drive belt - r + r Finish by refitting  - 1032D12  timing system protective cover(s) - r + r Finish by refitting  - 1008A46  cam shaft left rigid mount - r r Finish by refitting  - 1008B10  power unit front mount (timing side) flexible block - replace Finish by refitting  - 7055B91  Right front WHEEL ARCH LINER - R.R. Finish by refitting  - 7055B66  Engine compartment DUST SHIELD protection in right front wheel arch - R.R. Finish by refitting  - 4450B04  right front wheel r r Finish by refitting  - 1048A10  air cleaner filtering element - replace