1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R - Lancia - Ypsilon - eLearn

2428893 - 1032D12 timing system protective cover(s) - r + r

) Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

	Name	Connector
-	Battery	A1B

1. Disconnect the electrical connection for the rpm sensor.

	Name	Connector
1	Rpm sensor	K46

2. Release the electrical wiring for the rpm sensor from the band.

Disconnect the electrical connection from the cam angle sensor.

	Name	Connector
-	Timing sensor	K47

Proceed with removal - 1008B10 power unit front mount (timing side) flexible block - replace . Proceed with removal - 1008A46 cam shaft left rigid mount - r r . 1. Undo the bolts (1a) and remove the upper protective timing cover (1b).

1. Undo the bolts (1a) and remove the lower protective timing cover (1b).

Refitting ( Removing

) Fit the lower protective timing cover and secure using the bolts.Fit the upper protective timing gear cover and fix it using the bolt. Proceed with refitting - 1008A46 cam shaft left rigid mount - r r . Proceed with refitting - 1008B10 power unit front mount (timing side) flexible block - replace . Connect the electrical connection to the cam angle sensor.Fix the electrical wiring for the rpm sensor using the band.Connect the electrical connection for the rpm sensor.Connect the negative (-) battery terminal.