1072C16 EXHAUST MANIFOLD WITH CATALYTIC CONVERTER - R R - Lancia - Ypsilon - eLearn

2428938 - 1072C16 exhaust manifold with catalytic converter - r r

) Position the vehicle on the ramp.Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal - 1048A10 air cleaner filtering element - replace . Proceed with removal - 1072C44 exhaust manifold heat shield on bulkhead - r+r . 1. Disconnect the electrical connection for the front Lambda sensor for the catalytic converter.

	Name	Connector
1	Lambda sensor downstream of post-catalyzer	K17

1. Disconnect the electrical connection for the rear Lambda sensor for the catalytic converter.

	Name	Connector
1	Lambda sensor downstream of post-catalyzer	K17

1. Undo the nuts fixing the exhaust manifold and catalytic converter to the cylinder head.2. Undo the nuts fixing the exhaust manifold and catalytic converter to the exhaust silencer.3. Undo the bolt fixing the exhaust manifold and catalytic converter mounting bracket to the bracket on the gearbox.4. Remove the exhaust manifold with catalytic converter.Remove the gaskets.

Refitting ( Removing

) 1. Refit the catalytic converter in its seat complete with gaskets.2. Tighten the bolt fixing the exhaust manifold and catalytic converter mounting bracket to the gearbox.3. Tighten the nuts fixing the exhaust manifold and catalytic converter to the exhaust silencer to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
3	Nut	EXHAUST MANIFOLD WITH CATALYTIC CONVERTER	M8	(Silencer side) 2.3 ÷ 2.8

4. Tighten the nuts fixing the exhaust manifold with catalytic converter to the cylinder head to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
4	Nut	EXHAUST MANIFOLD WITH CATALYTIC CONVERTER	M8	(Cylinder head side) 2.5

Connect the electrical connection for the rear Lambda sensor for the catalytic converter.Connect the electrical connection for the front Lambda sensor for the catalytic converter. Proceed with refitting - 1072C44 exhaust manifold heat shield on bulkhead - r+r . Proceed with refitting - 1048A10 air cleaner filtering element - replace . Connect the negative (-) battery terminal.Remove the car from the ramps.