2429617 - 7045A60 front seat lift device - r r

Removing ( Refitting )  - 7045A13  front seat with side bag r rCheck the seat is in fully raised position.1. Fit tool (1a) to the gas spring (1b) as shown in the figure.

NameCountry
3Tool1.870.897.500
2. Tighten up tool nut (2a) (to compress the gas spring) until gas spring pin (2b) disengages from the seat (2c) in the tube.
Hold the tool in the correct position while tightening the nut.
CARRY OUT THE OPERATION WITH THE GREATEST CAUTION
3. Turn the tool and gas spring assembly as far as strictly necessary, then unscrew the tool nut until the gas spring withdraws fully.
keep the tool in the correct position whilst loosening the nut.
Refitting ( Removing ) Check that the gas spring device is undamaged and load as necessary.1. Rest head (1a) of gas spring (1b) in its seat on the tube, then fit tool (1c) as shown in the figure.

NameCountry
1cTool1.870.897.500
2. Tighten up tool nut (2a) (to compress the gas spring) until gas spring pin (2b) disengages from the seat (2c) in the tube.
Hold the tool in the correct position while tightening the nut.
CARRY OUT THE OPERATION WITH THE GREATEST CAUTION
3. Undo tool nut (3a) until gas spring device (3b) is fully engaged in the seat.
Keep the tool in the correct position whilst loosening the nut.
 - 7045A13  front seat with side bag r rTest the device is working properly.