2429624 - 7045A78 Front seat BACKREST FRAME. (one), left or right - R.R.
Removing
(
Refitting
)
- 7045A24 squab knob - r r - 7045A44 seat interior guard - r r - 7045A56 LEVER controlling DRIVER'S seat height adjustment
device - R.R . - 7045A43 seat exterior guard - r r - 7045B10 l/h or r/h front seat head restraint - r+r - 7045A48 LEVER and TRIM for folding backrest - R.R. - 7045D30 Front seat BACKREST COVER, left or right - R.R.
(without
separating the cover from the upholstery)
- 7045A51 SQUAB LUMBAR REINFORCEMENT ON FRONT SEAT, . (ONE)
LEFT or RIGHT - R.R . - 7045L30 Backrest folding control CABLE/ROD - R.R. - 5580C44 front side bag module one lh or rh r r1. Disconnect the electrical earth connection.2. Release the Air Bag module cable retainer.3. Release the Air Bag cable from the seat structure.4. Undo the backrest fixing bolts on both sides of the seat.
Refitting
(
Removing
)
Check that the backrest frame
is not damaged.Position the backrest and connect the end
of the cable.Tighten the bolts fixing the backrest.Position the wiring on the frame and secure
it using the retaining bands. | In order to prevent any possibility of the wiring being trapped, position it very carefully along the same route as the wiring which has been removed. |