The side lights activated signal is sent to pin 28 of connector
B of the Body Computer
M1
from the steering column switch
unit
H5
.
The 'ignition ON' signal (INT) for the switch
H1 reaches the underdashboard control unit
B2
at pin 11 of
connector H and from there moves on to the Body Computer
M1
(pin
9 of connector F).
The side lights are also activated if the
dusk sensor
K125 is fitted (signal at pin 7 of connector D of
M1);
The dusk sensor
K125 is supplied from the INT line protected
by fuse F49 of junction unit B2.
The lights are also activated by the PARK
button in the switch unit on the tunnel
H35 (signal at pin 17
of connector H of M1).
The Body Computer
M1 controls the supply
for the front side lights F10 (left) and F11 (right) - from pins
40 and 30 of connector B, the rear side lights F30 (left) F31 (right)
and the no. plate lights F50 and F51from pins 5, 6, 9 of connector
D and 38 of connector E.
The Body Computer
M1 is connected, via
the CAN line, to the instrument panel E50 to manage the side light
activation warning light and the 'fault' warning light in the case
of faults in the circuit or the dusk sensor.