| | Results
of the tests |
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|
| First
check that the MIL warning light has not come on | Continue to Step 1 | MIL warning light on | Continue as instructed See table K101 M.I.L WARNING LIGHT STAYS ON |
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|
| Connect
the Examiner to the diagnostic socketCarry out the active diagnosis of the warning lights | Continue to Step 2 | The warning light does
not come on | Replace instrument panel Op. 5560B11 |
| 2 | ELECTRICAL EQUIPMENT CHECK | All OK | Problems met | Operation |
|---|
| Check
that the connections between the heater plugs control unit, engine
management control unit, body computer and instrument panel are correct
See E5050 DIESEL ENGINES ELECTRONIC MANAGEMENT | Continue to Step 3 | Connections faulty | Restore the correct connections See E5050 DIESEL ENGINES ELECTRONIC MANAGEMENT |
| 3 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | End of diagnosis | . | |