1008A42 GEAR BOX LEFT RIGID MOUNT - R R - Lancia - Ypsilon - eLearn

2428852 - 1008A42 gear box left rigid mount - r r

) Position the vehicle on the ramp. Proceed with removal - 5530B10 battery - r+r . Proceed with removal - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. . 1. Disconnect the electrical connection from the air flow meter.

	Name	Connector
1	Air flow meter	K41

2. Loosen the band and disconnect the the turbocharger air inlet sleeve from the rigid pipe, air flow meter side.

1. Remove the air filter (1a) complete with air flow meter (1b) by releasing from the underlying pins and then from the rear fastenings.

1. Fit the tool (1a), complete with support mountings (1b).

	Name	Country
1a	Crossmember	1.870.595.000

	Name	Country
1b	Support mountings	1.870.650.000

2. Fit the tools (2a) and (2b), then connect them using links (2c) to the brackets on the engine.

	Name	Country
2a	Crossmember	1.860.851.000

	Name	Country
2a	Vertical support	1.871.001.300

1. Undo the nut fixing the power unit gearbox side rigid support to the flexible mounting.

Proceed with removal - 4450B02 left front wheel r r . Proceed with removal - 7055B90 Left front WHEEL ARCH LINER - R.R. . 1. Undo the bolts (1a) and remove the gearbox side rigid power unit support (1b).

Refitting ( Removing

) 1. Refit the gearbox side power unit rigid support (1a) in its seating and tighten the bolts (1b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	POWER UNIT GEAR BOX END RIGID MOUNT	M10	(Gearbox side) 4.5 ÷ 5.5

Proceed with refitting - 7055B90 Left front WHEEL ARCH LINER - R.R. . Proceed with refitting - 4450B02 left front wheel r r . 1. Undo the nut fixing the gearbox side rigid power unit support to the flexbile mounting to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1	Nut	POWER UNIT GEAR BOX END RIGID MOUNT	M12	(Flexible mounting side) 8.1 ÷ 9.9

Remove the safety tools used for supporting the power unit.

	Name	Country
-	Crossmember	1.860.851.000

	Name	Country
-	Vertical support	1.871.001.300

	Name	Country
-	Crossmember	1.870.595.000

	Name	Country
-	Support mountings	1.870.650.000

Replace the air filter, complete with air flow meter, in its housing.Connect the air intake sleeve to the turbocharger, air flow meter side, and tighten the band.Connect the electrical connection to the air flow meter. Proceed with refitting - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. . Proceed with refitting - 5530B10 battery - r+r . Remove the car from the ramps.