2125C30 GEAR ENGAGEMENT CABLE - R R - Lancia - Ypsilon - eLearn

2429130 - 2125C30 gear engagement cable - r r

) Position the vehicle on the ramp. Proceed with removal - 5530B10 battery - r+r . Proceed with removal - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. . 1. Disconnect the gear engagement/selector cables.2. Remove the stops and release the gear engagement/selector cables from the mounting bracket.

1. Release the gear selector and engagement cables from the fastening on the steering box, then remove them from the engine compartment.

Proceed with removal - 7040L28 tunnel switch panel - r r . Proceed with removal - 7040L22 REAR TRIM on TUNNEL -R.R. . Proceed with removal - 7040L20 tunnel trim - r r . Proceed with removal - 7040A18 glove compartment on facia - arrange . Proceed with removal - 7040A30 Left instrument panel lower TRIM - R.R. . Proceed with removal - 2125A30 lever/knob cover - r + r . Proceed with removal - 7040A28 TRIM on gearbox control panel - R.R. . Proceed with removal . 1. Disconnect the gear selector and engagement cables for the manual gearbox.2. Separate the gear selector and engagement cables (2a) from the mounting releasing the clips (2b).3. Remove the gear selector and engagement cables after haivng released the rubber mountings from the support.

Refitting ( Removing

) Place the gear selector and engagement cables in their housings.

Check that the rubber mountings for the gear selector and engagement cables are correctly positioned on the mounting.

Fasten the gear selector and engagement cables to the mounting using the clips.Connect the gear selector and engagement cables to the manual gearbox control lever.Fit the gear selector and engagement cables in the engine compartment and fasten the band to the steering box.Secure the gear engagement/selector cables to the mounting bracket with the stops.Connect the gear engagement/selector cables. Proceed with refitting . Proceed with refitting - 7040A28 TRIM on gearbox control panel - R.R. . Proceed with refitting - 2125A30 lever/knob cover - r + r . Proceed with refitting - 7040A30 Left instrument panel lower TRIM - R.R. . Proceed with refitting - 7040A18 glove compartment on facia - arrange . Proceed with refitting - 7040L20 tunnel trim - r r . Proceed with refitting - 7040L22 REAR TRIM on TUNNEL -R.R. . Proceed with refitting - 7040L28 tunnel switch panel - r r . Proceed with refitting - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. . Proceed with refitting - 5530B10 battery - r+r . Remove the car from the ramps.