2429330 - 5040D18 air conditioner control unit - r r
Removing
(
Refitting
)
- 7040L28 tunnel switch panel
- r r - 7040L22 REAR TRIM on TUNNEL -R.R. - 7040L20 tunnel trim - r r - 7040A18 glove compartment on facia - arrange - 7040A30 Left instrument panel lower TRIM - R.R. - 2125A30 lever/knob cover - r + r - 7040A28 TRIM on gearbox control panel - R.R. - 5505A25 SWITCH UNIT for OPTIONAL EQUIPMENT - R.R.1. Undo the bolts.2. Partly extract the control unit.
 | Name | Connector |
|---|---|---|
| 1 | Climate control system control unit | M70 |
Refitting
(
Removing
)
Connect the electrical connection.Fit the control unit in place and fasten
it using the bolts. - 5505A25 SWITCH UNIT for OPTIONAL EQUIPMENT - R.R. - 7040A28 TRIM on gearbox control panel - R.R. - 2125A30 lever/knob cover - r + r - 7040A30 Left instrument panel lower TRIM - R.R. - 7040A18 glove compartment on facia - arrange - 7040L20 tunnel trim - r r - 7040L22 REAR TRIM on TUNNEL -R.R. - 7040L28 tunnel switch panel - r r | Some CAN nodes, including the air conditioning control unit, are programmed with a default setting that the Customer will find on acquiring the vehicle. If the control unit is being replaced, the Parts Dept. will send a 'virgin' component: once fitted, the data stored in the Body Computer must be transferred to it by carrying out the PROXI ALIGNMENT procedure using the Examiner. |