2429786 - 1060A Low return fuel pressure circuit check

Connect the pressure transducer for the Examiner diagnostic equipment to the return pipe to the tank (1b).Turn the ignition on.Check that, within 10 seconds, that the pressure gauge reading is less than 1 bar.

The pump in the tank stops after 10 seconds.

Connect the pressure transducer for the Examiner diagnostic equipment to the return pipe to the tank (1b).Turn the ignition on.Check that, within 10 seconds, that the pressure gauge reading is less than 1 bar.

The pump in the tank stops after 10 seconds.

Connect the pressure transducer for the Examiner diagnostic equipment to the return pipe to the tank (1b).Turn the ignition on.Check that, within 10 seconds, that the pressure gauge reading is less than 1 bar.

The pump in the tank stops after 10 seconds.

Connect the pressure transducer for the Examiner diagnostic equipment to the return pipe to the tank (1b).Turn the ignition on.Check that, within 10 seconds, that the pressure gauge reading is less than 1 bar.

The pump in the tank stops after 10 seconds.