2428890 - 1032C10 MOVING timing TENSIONER - R.R. with timing belt/chain removed

Removing ( Refitting ) 1. Undo the bolts (1a) and remove the moving timing belt tensioner (1b). Refitting ( Removing ) Using suitable equipment (e.g. a vice), prepare the moving tensioner and keep it fully retracted using a suitable pin.

If a new timing moving tensioner is being fitted, it is available from the Parts Dept. already prepared and fully retracted using a suitable pin.

1. Fit the mobile timing belt tensioner (1a) and secure by tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	MOBILE TIMING TENSIONER	M6	(Cylinder head side) 0.8 ÷ 1.0

When the timing chain has been fitted, remove the moving tensioner pin and check that the moving tensioner piston is in contact with the plate.