2. Loosen the band and disconnect the the turbocharger air inlet
sleeve from the rigid pipe, air flow meter side.
1. Remove the air filter (1a) complete with air flow meter (1b)
by releasing from the underlying pins and then from the rear fastenings.
Undo the bolts and remove the engine oil
filter top cover.1. Unscrew and remove the cartridge oil filter cover (1a) complete
with O-ring (1b).2. Withdraw and remove the cartridge oil filter.
Refitting
(
Removing
)
Refit the cartridge oil filter in its seating.Refit in its seating the cartridge oil
filter cover complete with O-ring and tighten to the specified torque.
Fastening
Component
Ø
Value(daNm)
-
-
-
-
-
Refit in its seating the cartridge oil
filter top cover and secure with its bolts.Replace the air filter, complete with air
flow meter, in its housing.Connect the air intake sleeve to the turbocharger,
air flow meter side, and tighten the band.Connect the electrical connection to the
air flow meter.Connect the negative (-) battery terminal.
Removing
(
Refitting
)
Make sure that the ignition key is in the
OFF position; then disconnect the battery negative (-) terminal.
