1088E10 RADIATOR COOLING FAN - R + R - Lancia - Ypsilon - eLearn

2428979 - 1088E10 radiator cooling fan - r + r

) Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

	Name	Connector
-	Battery	A1B

1. Disconnect the electrical connection from the air flow meter.

	Name	Connector
1	Air flow meter	K41

2. Loosen the band and disconnect the the turbocharger air inlet sleeve from the rigid pipe, air flow meter side.

1. Remove the air filter (1a) complete with air flow meter (1b) by releasing from the underlying pins and then from the rear fastenings.

1. Disconnect the electrical connection from the engine fan motor.

	Name	Connector
1	Engine electric fan motor	N11

2. Disconnect the electrical connections from the engine cooling fan resistor.

	Name	Connector
2	Engine fan adjustment resistor	O10

3. Release electrical wiring (3a) from fastenings (3b) and move aside.

1. Undo the side bolts fixing the radiator cooling fan to the radiator.2. Remove the radiator cooling fan.

Refitting ( Removing

) Place the radiator cooling fan back in its housing.Tighten the side bolts securing the radiator cooling fan to to the radiator.Connect the electrical connections to the resistor for the engine cooling fan.Connect the electrical connection to the engine fan motor.Replace the air filter, complete with air flow meter, in its housing.Connect the air intake sleeve to the turbocharger, air flow meter side, and tighten the band.Connect the electrical connection to the air flow meter.Connect the negative (-) battery terminal.