2429017 - 1036H57 hydraulic tappets all r r
Removing
(
Refitting
)
Position the vehicle on the ramp.
Drain the air conditioner coolant circuit
- 0010T84 coolant for air conditioning system dehydrate and recharge
.
Proceed with removal
- 4450B04 right front wheel r
r
.
Proceed with removal
.
Proceed with removal
- 7055B66 Engine compartment DUST
SHIELD protection in right front wheel arch - R.R.
.
Proceed with removal
- 7055B91 Right front WHEEL ARCH
LINER - R.R.
.
Proceed with removal
- 5530B10 battery - r+r
.
Proceed with removal
- 5530B52 Battery DRIP TRAY/SUPPORT
- R.R.
.
Proceed with removal
- 1060G90 diesel injection wiring
harness - r r
.
Proceed with removal
- 1016B10 single cylinder head extension
- change gasket
.
1. Remove the valve rocker arms.2. Remove the hydraulic tappets.
Refitting
(
Removing
)
Lubricate with engine oil and refit the
hydraulic tappets in their seatings. | Position the hydraulic tappets with the oil passage hole facing towards the outside of the bottom cylinder head: this position puts this hole in communication with the oil channel present in the bottom cylinder head. |