2. Loosen the band and disconnect the the turbocharger air inlet
sleeve from the rigid pipe, air flow meter side.
1. Remove the air filter (1a) complete with air flow meter (1b)
by releasing from the underlying pins and then from the rear fastenings.
Undo the fuel filler cap and remove it
to discharge the pressure in the system.1. Disconnect the quick-release connector for the front fuel supply
pipe, fuel filter side.
1. Disconnect the quick-release connector for the front fuel supply
pipe, pressure pump side.2. Undo the bolts (2a) and open the pipe passage channel (2b).3. Remove the front fuel supply pipe (3a) after releasing it from
the bands (3b).
Refitting
(
Removing
)
Place the front fuel supply pipe back in
its housing and fix it using the bands.Close the pipe passage channel and secure
it with the bolts.Connect the quick-release connector for
the front fuel supply pipe, fuel filter side.Connect the quick-release connector for
the front fuel supply pipe, pressure pump side.Replace the air filter, complete with air
flow meter, in its housing.Connect the air intake sleeve to the turbocharger,
air flow meter side, and tighten the band.Connect the electrical connection to the
air flow meter.Connect the negative (-) battery terminal.
Removing
(
Refitting
)
Ensure that the ignition key is in OFF
position, then disconnect the battery negative terminal (-).
