2429029 - 1048B20 air delivery sleeve from heat exchanger to rigid pipe - replace
Removing
(
Refitting
)
Position the vehicle on the ramp.
Proceed with removal
.
1. Loosen the bands (1a) and remove the air supply hose between
the heat exchanger and the rigid pipe (1b).
Refitting
(
Removing
)
Place the air supply hose between the heat
exchanger and the rigid pipe back in its housing and fasten it using
the bands.
Proceed with refitting
.
Remove the car from the ramps.
Removing
(
Refitting
)
Position the vehicle on the ramp.
Proceed with removal
.
1. Loosen the bands (1a) and remove the air supply hose between
the heat exchanger and the rigid pipe (1b).