2. Loosen the band and disconnect the the turbocharger air inlet
sleeve from the rigid pipe, air flow meter side.
1. Remove the air filter (1a) complete with air flow meter (1b)
by releasing from the underlying pins and then from the rear fastenings.
Draw off coolant from the engine coolant
tank using a suitable syringe.1. Disconnect the quick-release fitting of the coolant return pipe
from the engine coolant reservoir.2. Loosen the band and disconnect the supply pipe, engine side.3. Undo the nuts (3a) and remove the engine coolant tank (3b) with
system supply pipe.
Refitting
(
Removing
)
Refit the coolant reservoir with system
supply pipe in its seating and secure with its nuts.Connect the supply pipe, engine side and
tighten the band.Connect the quick-release fitting on the
coolant return pipe to the engine coolant reservoir.
Refill the engine cooling system with coolant
- 0010T20 coolant change
.
Replace the air filter, complete with air
flow meter, in its housing.Connect the air intake sleeve to the turbocharger,
air flow meter side, and tighten the band.Connect the electrical connection to the
air flow meter.Connect the negative (-) battery terminal.
Removing
(
Refitting
)
Ensure that the ignition key is in OFF
position, then disconnect the battery negative terminal (-).
