1092A14 PULLEY SUPPORT FLANGE ON CRANKSHAFT - R.R. - Lancia - Ypsilon - eLearn

2429084 - 1092A14 Pulley support FLANGE on crankshaft - R.R.

) Position the vehicle on the ramp. Proceed with removal - 4450B04 right front wheel r r . Proceed with removal - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R. . Proceed with removal - 7055B91 Right front WHEEL ARCH LINER - R.R. . Proceed with removal - 1092G10 single engine belt r r . Proceed with removal - 1092A10 Crankshaft services PULLEY - R.R. . 1. Remove the plug (1a) and, in its place, fit the tool (1b) on the exhaust side camshaft.

Fit the tool positioning it with the references in a horizontal direction and checking that it is correctly inserted in the housing in the camshaft.

	Name	Country
1b	Template	1.871.000.900

2. Fit a suitable (8 mm diameter) pin via the special opening in the gearbox.

Check that the pin is correctly inserted in the housing in the engine flywheel.

1. Undo the left-threaded bolt (1a) for the pulley flange on the crankshaft using the tools (1b) and (1c) for counter-torque.

	Name	Country
1b	Counter-torque	1.871.000.200

	Name	Country
1c	Support for counter-torque	1.860.831.000

2. Remove the pulley flange on the crankshaft.

Refitting ( Removing

) 1. Refi the pulley flange to the crankcase (1a) and tighten the left-threaded bolt (1b) to the specified torque using tools (1c) and (1d) as countertorque.

	Fastening	Component	Ø	Value(daNm)
1b	Left hand thread bolt	PULLEY SUPPORT FLANGE ON CRANKSHAFT	M14	(Crankshaft side) 21.9 ÷ 24.2

	Name	Country
1c	Counter-torque	1.871.000.200

	Name	Country
1d	Support for counter-torque	1.860.831.000

Remove the pin from the hole on the gearbox.Remove the tool for timing the exhaust side camshaft and tighten the plug.

	Name	Country
-	Template	1.871.000.900

Proceed with refitting - 1092A10 Crankshaft services PULLEY - R.R. . Proceed with refitting - 1092G10 single engine belt r r . Proceed with refitting - 7055B91 Right front WHEEL ARCH LINER - R.R. . Proceed with refitting - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R. . Proceed with refitting - 4450B04 right front wheel r r . Remove the car from the ramps.