2429102 - 1820B30 OPERATING CYLINDER/CLUTCH HYDRAULIC ACTUATOR - R.R.

Removing ( Refitting ) Position the vehicle on the ramp. Proceed with removal  - 5530B10  battery - r+r . Proceed with removal  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R. . 1. Remove the cap on the bleed valve.2. Connect the collection system (pipe and reservoir) to the bleed valve on the clutch operating cylinder.3. Lift the retaining clip (3a) until the first click is heard and remove the pipe (3b) sufficiently to uncover the bleed hole.Let the hydraulic clutch system drain completely.
Lift up the clip completely and disconnect the pipe from the clutch operating cylinder.1. Undo the bolts (1a) and move the clutch operating cylinder (1b).
Refitting ( Removing ) 1. Place the clutch operating cylinder (1a) back in its housing and secure it tightening the bolts (1b) to the recommended torque.

FasteningComponentØValue(daNm)
1bBoltCLUTCH SLAVE CYLINDERM8(Gearbox side) 1.6 ÷ 2.0
Fit the pipe fully home in its seat on the clutch operating cylinder and secure with the retaining clip. Proceed with refitting  - 0010T67  hydraulic clutch system bleed air . Proceed with refitting  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R. . Proceed with refitting  - 5530B10  battery - r+r . Remove the car from the ramps.