2110D74 DIFFERENTIAL L/H INNER DRIVE SHAFT - R + R - Lancia - Ypsilon - eLearn

2429118 - 2110D74 differential l/h inner drive shaft - r + r

) Position the vehicle on the ramp. Proceed with removal - 4450B02 left front wheel r r . 1. Unod the bolts fixing the left driveshaft to the differential internal driveshaft.2. Undo the top bolt (2a) and loosen the bottom bolt (2b) securing the front left steering axle to the front shcok absorber.Move the left drive shaft away from the differential internal drive shaft and secure it as appropriate.

1. Undo the plug and drain the manual gearbox and differential.

Collect the manual gearbox and differential oil in a suitable container.

1. Use a lever to prise up and remove the left differential internal driveshaft.

Refitting ( Removing

) Place the left differential internal driveshaft back in its housing.1. Tighten the manual gearbox and differential fluid drain plug to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1	Drain plug	GEAR CASING PADS	M22	(Differential side) 4.6

Connect the left drive shaft to the differential inner drive shaft.1. Tighten the bolts fixing the left front hub steering knuckle to the front shock absorber to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1	Bolt	FRONT HUB STEERING KNUCKLE.	M10	(Shock absorber side) 7.1 ÷ 7.9

2. Tighten the bolts fixing the left driveshaft to the left differential internal driveshaft to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	FRONT DRIVE SHAFT COMPLETE WITH JOINTS	M8	(Differential internal driveshaft side) 3.6 ÷ 4.4

Proceed with refitting - 4450B02 left front wheel r r . Refill the manual gearbox and differential - 0010T41 MANUAL GEARBOX OIL - Check level and top up, if necessary . Remove the car from the ramps.