2710A31 INTERMEDIATE DRIVE SHAFT - R R - Lancia - Ypsilon - eLearn

2429139 - 2710A31 intermediate drive shaft - r r

) Position the vehicle on the ramp. Proceed with removal - 4450B04 right front wheel r r . Proceed with removal - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R. . Proceed with removal - 7055B91 Right front WHEEL ARCH LINER - R.R. . 1. Undo the bolts fixing the right front hub steering knuckle to the front shock absorber.2. Undo the bolts (2a) and remove the drive shaft (2b) from the intermediate drive shaft.

1. Undo the plug and drain the gearbox-differential oil.

Collect the gearbox-differential oil in a suitable container.

1. Undo the bolts (1a) and remove the intermediate drive shaft (1b).2. Remove the dust excluder.

Refitting ( Removing

) 1. Place back in its housing the intermediate drive shaft (1a) complete with dust cover (1b) and secure it with its bolts (1c) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1c	-	-	-	-

1. Tighten the gearbox-differential drain plug to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1	Drain plug	GEAR CASING PADS	M22	(Differential side) 4.6

1. Connect the driveshaft to the intermediate driveshaft and fix it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1	Bolt	DRIVESHAFT	M8

2. Tighten the bolts fixing the right front hub steering knuckle to the front shock absorber to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	FRONT HUB STEERING KNUCKLE.	M10	(Shock absorber side) 7.1 ÷ 7.9

Proceed with refitting - 7055B91 Right front WHEEL ARCH LINER - R.R. . Proceed with refitting - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R. . Proceed with refitting - 4450B04 right front wheel r r . Refill the manual gearbox and differential - 0010T40 change manual gearbox oil . Remove the car from the ramps.