2429182 - 3330E34 Intermediate FLEXIBLE PIPE (one), left or right, to rear brakes - R.R.

Removing ( Refitting ) Position the vehicle on the ramp.FOR LEFT HOSE Proceed with removal  - 4450B06  left rear wheel r r . FOR RIGHT HOSE Proceed with removal  - 4450B08  right rear wheel r r . 1. Remove the protective cap from the bleed screw for the rear brake cylinder.2. Connect the collection system (pipe and reservoir) to the bleed valve on the brake caliper.3. Loosen the bleed valve on the rear brake cylinder.Wait for the brake-clutch reservoir to drain. 1. Remove the retaining clips.2. Under connectors (2a) and (2b) using tool (2c).

	Name	Country
2c	Box wrench for brake fittings	1.856.132.000

3. Remove the intermediate hose to the rear brakes. Refitting ( Removing ) 1. Refit the intermediate hose to the rear brakes (1a) and tighten connectors (1b) to the specified torque using tool (1c).

	Fastening	Component	Ø	Value(daNm)
1b	Connector	REAR BRAKE INTERM HOSE	-	(Rigid pipe side) 1.4 ÷ 1.8

	Name	Country
1c	Box wrench for brake fittings	1.856.132.000

2. Refit the retaining clips in their seats. Proceed with refitting  - 0010T64  brake and or clutch fluid check level and top up as necessary . Proceed with refitting  - 0010T65  hydraulic brake system bleed air . FOR LEFT HOSE Proceed with refitting  - 4450B06  left rear wheel r r . FOR RIGHT HOSE Proceed with refitting  - 4450B08  right rear wheel r r . Remove the car from the ramps.