2429290 - 5010D28 upper mixed air temperature sensor (1), lh or rh r r following electrical circuit check

Removing ( Refitting )  - 7040L28  tunnel switch panel - r r - 7040L22  REAR TRIM on TUNNEL -R.R. - 7040L20  tunnel trim - r r - 7040A18  glove compartment on facia - arrange - 7040A30  Left instrument panel lower TRIM - R.R. - 2125A30  lever/knob cover - r + r - 7040A28  TRIM on gearbox control panel - R.R.1. Disconnect the electrical connection.

	Name	Connector
1	Right lower air distribution temperature sensor	K111

	Name	Connector
1	Left lower air distribution temperature sensor	K113

2. Extract the sensor (press fit). Refitting ( Removing ) Check that the sensor is not damaged.Fit the sensor in place and connect the electrical connection. - 7040A28  TRIM on gearbox control panel - R.R. - 2125A30  lever/knob cover - r + r - 7040A30  Left instrument panel lower TRIM - R.R. - 7040A18  glove compartment on facia - arrange - 7040L20  tunnel trim - r r - 7040L22  REAR TRIM on TUNNEL -R.R. - 7040L28  tunnel switch panel - r rUsing the Examiner, check that the system has not picked up errors during the operation.