5540B25 DIPPED HEADLAMP BEAM (1), LH OR RH - R R - Lancia - Ypsilon - eLearn

2429409 - 5540B25 dipped headlamp beam (1), lh or rh - r r

) Open the bonnet lid.1. Turn the cover retainer.2. Remove cover (2a), releasing the retainers (2b).

1. Turn bulb holder (1a), releasing tabs (1b) from retainers (1c), then remove the bulb holder with bulb.2. Remove bulb (2a) from bulb holder (2b).

If the lamp is working properly, avoid touching the bulb with your hands. If this does happen, clean the bulb with alcohol.

Refitting ( Removing

) Check the condition and the cleanliness of the lamp.

Avoid touching the bulb with your hands. If this does happen, clean the bulb with alcohol.

1. Fit the bulb in the bulb holder and fit the bulb holder by engaging the tabs in the retainers. Correct bulb position is shown in the figure.

Refit the cover correctly, exerting pressure to the centre of it, until a click is heard. Check that it is secure.Reposition the cover retainer.Check the operation of the bulb.