2429416 - 5540C24 motor (one) for l/h or r/h headlamp/light cluster alignment correction - r+r

Removing ( Refitting ) Open the bonnet lid.1. Turn the cover retainer.2. Remove cover (2a), releasing the retainers (2b). 1. Disconnect the electrical connection.2. Rotate and withdraw the motor slightly (bayonet mount).3. Release motor ball (3a) from seat (3b).4. Recover the motor. Refitting ( Removing ) Check that the motor is undamaged.Connect the electrical connection and position the motor.1. Check that ball (1a) engages correctly in seat (1b) when motor (1c) is fitted (bayonet mount). Refit the cover correctly, exerting pressure to the centre of it, until a click is heard. Check that it is secure.Reposition the cover retainer.Check the operation of the headlamp alignment by operating the special switch from the passenger compartment with the dipped headlamps on. If necessary,  - 5540B38  headlamp/light cluster light beam - position