5580C22 AIR BAG MODULE - PASSENGER SIDE - R.R. - Lancia - Ypsilon - eLearn

2429453 - 5580C22 AIR BAG MODULE - Passenger side - R.R.

Before removing and refitting the control unit, carry out the following preliminary operations.Place the ignition key in the OFF position and extract it;- Disconnect the battery leads and insulate.- Wait for 10 minutes before continuing.

FOLLOW ALL THE RECOMMENDED SAFETY FULES (see 5580C - Precautions).

Removing ( Refitting

) - 7040A26 steering column trim - r+r - 5040C12 air conditioner housing - r r with facia disconnected - 7040A74 TRIM under control panel - R.R. - 7040A11 control panel lid - r + r - 5560B10 analogue control panel - r+r - 5570T80 car radio unit - r+r - 7040L28 tunnel switch panel - r r - 7040L22 REAR TRIM on TUNNEL -R.R. - 7040L20 tunnel trim - r r - 7040A18 glove compartment on facia - arrange - 7040A30 Left instrument panel lower TRIM - R.R. - 2125A30 lever/knob cover - r + r - 7040A28 TRIM on gearbox control panel - R.R. - 5505A25 SWITCH UNIT for OPTIONAL EQUIPMENT - R.R. - 5040D18 air conditioner control unit - r r - 5580C26 LOCK BARREL KEY/SWITCH for deactivating passenger 'AIR BAG - R.R. - 7040A10 instrument facia trim - r+r1. Disconnect the electrical connections for the Air Bag module.

	Name	Connector
1	Air Bag in dashboard (passenger side)	Q11

2. Undo nuts (2a) and remove the air bag module (2b).Place the Air Bag module in the special cupboard, resting it on a free surface with the bag facing upwards.

Refitting ( Removing

) Observe the following precaution.

Handle the Air Bag module with extreme caution. Ensure the battery is disconnected.

If a new module is being fitted, attach the labels. Detach the removable part of the adhesive label from the new module and put it in a specific file recording the vehicle details (model, registration data, chassis no.) and the serial no. of the old module. This file should be kept for future checks. A new label is supplied together with the module, to be stuck on top of the existing one. However, it should first be perforated to indicate the month and 14 years after the year when the module is fitted (e.g. 2017 will correspond to 2003). Position the Air Bag module and secure with the nuts.

	Fastening	Component	Ø	Value(daNm)
-	Nut	PASSENGER AIR BAG MODULE	M6	0.8

Connect the electrical connection. - 7040A10 instrument facia trim - r+r - 5580C26 LOCK BARREL KEY/SWITCH for deactivating passenger 'AIR BAG - R.R. - 5040D18 air conditioner control unit - r r - 5505A25 SWITCH UNIT for OPTIONAL EQUIPMENT - R.R. - 7040A28 TRIM on gearbox control panel - R.R. - 2125A30 lever/knob cover - r + r - 7040A30 Left instrument panel lower TRIM - R.R. - 7040A18 glove compartment on facia - arrange - 7040L20 tunnel trim - r r - 7040L22 REAR TRIM on TUNNEL -R.R. - 7040L28 tunnel switch panel - r r - 5570T80 car radio unit - r+r - 5560B10 analogue control panel - r+r - 7040A11 control panel lid - r + r - 7040A74 TRIM under control panel - R.R. - 5040C12 air conditioner housing - r r with facia disconnected - 7040A26 steering column trim - r+rConnect the battery.Check the operation of the system using the Examiner.