2429456 - 5580C44 front side bag module one lh or rh r r

Before removing and refitting the Air Bag module, the following preliminary operations must be carried out. Place the ignition key in the OFF position and extract it; Disconnect the battery leads and insulate. Wait for 10 minutes before continuing.

FOLLOW ALL THE RECOMMENDED SAFETY FULES (see 5580C - Precautions).

Removing ( Refitting ) 1. Open the hinges (1a) along the entire section (1b). 1. Move the cover with padding slightly.2. Undo the Air Bag module nuts. 1. Disconnect the electrical connection.2. Remove the Air Bag module. Place the Air Bag module in the special cupboard, resting it on a free surface with the bag facing upwards. Refitting ( Removing ) Observe the following precaution.

Handle the Air Bag module with extreme caution. Ensure the battery is disconnected.

If a new module is being fitted, attach the labels as described below.1. Detach the removable part (1b) of the adhesive label from the new module (1a). Place a copy of the label (1b) in a specific file containing the vehicle details (model, registration data, chassis number) and the serial number of the old module. This file should be kept for future checks. 2. Apply the detachable part of the original label (1b) to the bottom of the seat, where there are already similar labels for the seat, squab cover and Air Bag wiring. However, it should first be perforated to indicate the month and 14 years after the year when the module is fitted (e.g. 2017 will correspond to 2003). Position the airbag module connecting the electrical connection.Tighten the retaining nuts.

	Fastening	Component	Ø	Value(daNm)
-	Nut	FRONT SIDE AIR BAG MODULE ASSEMBLY.	M6	0.8

Position the trim and close the hinges.Move the seat through all its various settings to ensure that movements take place without binding or noise. Check the operation of the system using the Examiner.