2429594 - 7040H38 central pillar upper element - r r

Removing ( Refitting )  - 7040L40  front compartment scuff strip - r r - 7050A20  one-piece rear seat cushion - r r - 7050A10  rear seat - r+r - 7040H50  rear panel - r r1. Release the cover.2. Undo the bolt.3. Remove the retaining bracket (3a) and release it from the end (3b) of the seat belt.
1. Remove the cover.2. Undo the bolt.3. Undo the lower trim retaining bolts.
1. Remove the pilar trim (1a) releasing the retainer (1b) from the idler nut (1c), then release the trim from the seat belt (1d).
Refitting ( Removing ) Check that the cover is undamaged.Fit the seat belt and position the trim fitting the retainer.Tighten the bolts and fit the cover.Fit the seat belt, position the lower retaining bracket and tighten the bolt.

FasteningComponentØValue(daNm)
-BoltFRONT BELT SLIDING BRACKET.7/16"4.0
Position the bolt cover. - 7040H50  rear panel - r r - 7050A10  rear seat - r+r - 7050A20  one-piece rear seat cushion - r r - 7040L40  front compartment scuff strip - r r