2429698 - 7065C69 interior rear view mirror plate - r r

Removing ( Refitting ) This procedure provides instructions for refitting the plate. When correctly secured, the plate can no longer be detached from the glass.

Do not attempt to remove the plate from the glass because the glass could be damaged.

Refitting ( Removing ) 1. Remove any traces of adhesive from the plate.2. Thoroughly degrease the mating surfaces between plate and glass using disposable paper and heptane.3. Remove any adhesive traces from the windscreen glass.4. Thoroughly degrease mating surfaces between glass and plate using disposable paper and heptane.5. Apply a suitable length of double-sided adhesive tape to the plate (3M 4265, FASSON 450/460, DUPLOMONT 910 F LOHMANN)6. Heat the plate to a temperature of 40-50°C and position on the windscreen glass, then apply a pressure of 5 kg/cm2 to the plate; wait until the plate cools to room temperature.

Do not knock the rear view mirror for the next 24 hours because otherwise the bond will not set properly.