2429075 - 1084B26 emgine oil intake duct - r r
 Removing
		(
		Refitting
Removing
		(
		Refitting )
	Position the vehicle on the ramp.Make sure that the ignition key is in the
OFF position; then disconnect the battery negative (-) terminal.
		)
	Position the vehicle on the ramp.Make sure that the ignition key is in the
OFF position; then disconnect the battery negative (-) terminal.|  | Name | Connector | 
|---|---|---|
| - | Battery | A1B | 

 Refitting
		(
		Removing
Refitting
		(
		Removing )
	Place the engine oil inlet duct, complete
with gasket, back in its housing on the timing cover and secure
it using the bolts. 
                                          Proceed with refitting 
                                           - 1020B10  cover of timing system
with chain drive - r + r replace oil seal and gasket
                                           .
                                       
                                          Proceed with refitting 
                                           - 1020A20  crank case oil sump -
r + r clean seals for sealant application
                                           .
                                       
                                          Proceed with refitting 
                                           - 2110A60  manual gearbox/engine
coupling bracket - r+r
                                           .
                                       
                                          Proceed with refitting 
                                           - 1092A10  Crankshaft services PULLEY
- R.R.
                                           .
                                       
                                          Proceed with refitting 
                                           - 1092G10  single engine belt r r
                                           .
                                       
                                          Proceed with refitting 
                                           - 7055B91  Right front WHEEL ARCH
LINER - R.R.
                                           .
                                       
                                          Proceed with refitting 
                                           - 7055B66  Engine compartment DUST
SHIELD protection in right front wheel arch - R.R.
                                           .
                                       
                                          Proceed with refitting 
                                           - 4450B04  right front wheel r
r
                                           .
                                       Connect the negative (-) battery terminal.
                                          Refill the engine oil lubrication system 
                                           - 0010T11  engine oil check level and top up
                                           .
                                       
                                          Refill the engine cooling system with coolant 
                                           - 0010T20  coolant change
                                           .
                                       
                                          Fill the air conditioner coolant circuit
                                           - 0010T84  coolant for air conditioning system dehydrate and recharge
                                           .
                                       
                                          Proceed with refitting 
                                          
                                           .
                                       Remove the car from the ramps.
		)
	Place the engine oil inlet duct, complete
with gasket, back in its housing on the timing cover and secure
it using the bolts. 
                                          Proceed with refitting 
                                           - 1020B10  cover of timing system
with chain drive - r + r replace oil seal and gasket
                                           .
                                       
                                          Proceed with refitting 
                                           - 1020A20  crank case oil sump -
r + r clean seals for sealant application
                                           .
                                       
                                          Proceed with refitting 
                                           - 2110A60  manual gearbox/engine
coupling bracket - r+r
                                           .
                                       
                                          Proceed with refitting 
                                           - 1092A10  Crankshaft services PULLEY
- R.R.
                                           .
                                       
                                          Proceed with refitting 
                                           - 1092G10  single engine belt r r
                                           .
                                       
                                          Proceed with refitting 
                                           - 7055B91  Right front WHEEL ARCH
LINER - R.R.
                                           .
                                       
                                          Proceed with refitting 
                                           - 7055B66  Engine compartment DUST
SHIELD protection in right front wheel arch - R.R.
                                           .
                                       
                                          Proceed with refitting 
                                           - 4450B04  right front wheel r
r
                                           .
                                       Connect the negative (-) battery terminal.
                                          Refill the engine oil lubrication system 
                                           - 0010T11  engine oil check level and top up
                                           .
                                       
                                          Refill the engine cooling system with coolant 
                                           - 0010T20  coolant change
                                           .
                                       
                                          Fill the air conditioner coolant circuit
                                           - 0010T84  coolant for air conditioning system dehydrate and recharge
                                           .
                                       
                                          Proceed with refitting 
                                          
                                           .
                                       Remove the car from the ramps.