2429459 - 5580C86 side bag wiring harness (one) lh or rh - r r or replace
FOLLOW ALL THE RECOMMENDED SAFETY FULES (see 5580C - Precautions). |
1. Move the cover with padding slightly.2. Disconnect the electrical connection from the Air Bag module.3. Disconnect the electrical earth connection.4. Release the wiring retainer.
1. Working underneath the seat, release the wiring retainers.2. Release the retainer (2a) and rotate the connector mounting bracket
(2b) so that it is in an accessible position.3. Release the connector from the bracket.4. Keep the cable loom.
Refitting
(
Removing
)
Check that the wiring is intact
and shows no signs of damage.If a new wiring is being fitted, attach
the labels as described below.1. Detach the removable part (1b) of the adhesive label from the
new wiring (1a). Place a copy of the label (1b) in a specific file
containing the vehicle details (model, registration data, chassis
number) and the serial number of the old squab cover. This file
should be kept for future checks. 2. Apply the original label (1b) to the inner part at the bottom
of the seat, where there are already the equivalent labels for seat,
side Air Bag module and backrest cover.
Position the wiring on the
frame and secure it using the retaining bands.
In order to prevent any possibility of the wiring being trapped, position it very carefully along the same route as the wiring which has been removed. |