2427505 - I04 SIDE LIGHTS / NUMBER PLATE LIGHT AND DIPPED BEAMS DO NOT WORK IN AUTO MODE
The side light/number plate light and dipped beams do not work with the exterior light switch on the stalk unit in AUTO position. N.B.: with the AUTO function the side / no. plate lights and dipped headlamps are automatically switched on by the Body Computer Node which receives the command from the dusk sensor (CPS). The sensitivity of the CPS can be adjusted using the 'Mode' control in the centre control panel. If the dusk sensor is faulty and with the C.L.E. on AUTO, the Body Computer switches on the side/no. plate lights and the dipped headlamps.| Results of the tests | ||||
| 0 | PRELIMINARY CHECK | All OK | Problems met | Operation |
|---|---|---|---|---|
| Check whether the lights come on following a manual control and with Park control | Continue to Step 1 | The lights do not come on or come on incorrectly. | Test for dipped beams not working/side lights not working | |
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
Connect the Examiner to the tester input and check the body computer for:
| Continue to Step 2 | Presence of faults | Continue according to the instructions for the diagnostic equipment | |
| 2 | ELECTRICAL CIRCUIT CHECK | All OK | Problems met | Operation |
Check, in order:
| Continue to Step 3 | Connection s.c. or o.c. | Renew the electrical connections See E2010 SIDE LIGHTS / NO. PLATE LIGHTS See E2011 DIPPED HEADLAMPS | |
| 3 | CHECK ON STEERING COLUMN SWITCH UNIT | All OK | Problems met | Operation |
| Check the operation of the steering column switch unit, in particular the AUTO lights enablement on the stalk unit | Continue to Step 4 | Control not working | Replace the steering column switch unit | |
| 4 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | |||