2427509 - I08 SIDE LIGHTS NOT WORKING

When the side light switch is operated, the side lights do not come on.
the voltage for side light activation is supplied directly from the body computer node.

Lights may be operated by means of the following commands:

  • 1. EXTERIOR LIGHTING CONTROL (on stalk unit) - Side lights
  • 2. PARKING LIGHT CONTROL (PARK button) - parking lights
  • 3. COMMAND FROM DUSK SENSOR
  • 4. FOLLOW-ME-HOME COMMAND FROM STALK UNIT
Results of the tests
1CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Connect the Examiner to the diagnostic socket

Check:

  • that there are no faults in the Body Computer
  • the operation of the lights in active diagnosis.
Continue to Step 3Side lights error (open circuit or short circuit)Check operation of individual lights: See   E2010  SIDE LIGHTS / NO. PLATE LIGHTS
2CHECK ON INDIVIDUAL LIGHTSAll OKProblems metOperation
Check the condition of the individual bulbs and complete bulb holder assemblyContinue to Step 3Bulb damagedReplace the bulbs
Bulb damagedRepair or replace the right front light cluster
Bulb damagedRepair or replace the left front light cluster
Bulb damagedRepair or replace the right rear light cluster
Bulb damagedRepair or replace the left rear light cluster
3CHECK ON SIDE LIGHTS ELECTRICAL CIRCUITAll OKProblems metOperation

Check:

  • connections between Body Computer and steering column switch unit;
  • connections between ignition switch, Dashboard Control Unit and Body Computer;
  • connections between Body Computer and bulbs;
  • bulb earth: See   E2010  SIDE LIGHTS / NO. PLATE LIGHTS
Continue to Step 4Connections brokenRenew the electrical connections See   E2010  SIDE LIGHTS / NO. PLATE LIGHTS
Lamps earth defectiveRenew the bulb earth: See   E2010  SIDE LIGHTS / NO. PLATE LIGHTS
4CHECK ON STEERING COLUMN SWITCH UNITAll OKProblems metOperation
Check that the steering column switch unit is working properly: in particular, the side lights switch: Continue to Step 5Stalk unit not working properlyReplace the stalk unit
5CHECK ON CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer present End of diagnosisFault persists Replace the Body Computer