I09 SIDE LIGHT (ONE) FRONT. OR REAR. - RH OR LH NOT WORKING - Lancia - Ypsilon - eLearn

Front and rear side lights are fitted with two bulbs per light. If even one bulb is not working, replace and check using the internal light circuit

1	CHECKING ELECTRICAL EQUIPMENT	All OK	Problems met	Operation
		Results of the tests
	Check the condition of the wiring between the body computer node and affected light. See E2010 SIDE LIGHTS / NO. PLATE LIGHTS	Continue to Step 2	Wiring short circuited or with circuit open	Renew the electrical connections See E2010 SIDE LIGHTS / NO. PLATE LIGHTS
2	CHECKING LIGHT ELECTRICAL SYSTEM	All OK	Problems met	Operation
	Check internal light connections See E2010 SIDE LIGHTS / NO. PLATE LIGHTS	Continue to Step 3	Connections short-circuited	Restore to operation and change light if necessary
3	CHECKING BUILB CONDITION	All OK	Problems met	Operation
	Check the condition of both bulbs	Continue to Step 4	Bulbs faulty	Replace bulbs
4	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Light does not come on	Replace the Body Computer Op. 5505A32